A walkie pallet jack is a vehicle used for industrial transfers that can not only run but also transfer palletized goods. Since its power source is a battery, it is energy-saving and environmentally friendly, with a small and flexible body and a centralized control handle for easy operation. Next, let's learn about the maintenance methods of a walkie pallet jack.
Specific description
First, always pay attention to the battery power and charge it in time to ensure sufficient power. Secondly, check the reliability and flexibility of the steering components, as well as the tightness of each component, such as wheel screws, servo screws, wheel fixing rods, lifting chain pull-in screws, etc. In addition, it is also necessary to regularly check for leakage, including hydraulic system lifting cylinders, batteries, drive motors, pipe joints, etc. At the same time, check the pedal strength of the walkie pallet jack and the quality of the control handle buttons. In addition, regularly check the wear degree of the drive gear, add lubricating oil in time to ensure its smoothness and avoid excessive wear. In addition, check the acceptance strength of the fork and the movement of the hydraulic cylinder. If it becomes blunt, lubricating oil needs to be added.
During the maintenance process, overcharging and over-discharging of the battery should be prohibited, and balanced charging should be performed. Newly purchased electric vehicles should be fully charged at one time, and the battery should be charged at the working frequency. Do not place conductive objects on the battery during charging, and keep the battery appearance clean and dry. During operation, the battery voltage, electrolyte density and temperature need to be checked once a week, and the total amount measurement should be done once a month. The battery should be placed in a clean, dry and ventilated place, avoid exposure to direct sunlight, and never touch the battery or heavy objects. After the vehicle is used, it is necessary to clean the dirt and garbage on the vehicle and check whether the power cord is intact. In addition, the hydraulic system needs to be maintained every six months to check whether the cylinder, joints, hoses, etc. are leaking, and whether the electrical insulation is normal.
Finally, when using a walking electric transporter, pay attention to check whether the handbrake is in the proper position to avoid collisions or accidents. If an accident occurs, the power switch should be quickly pulled down to cut off the power supply to ensure safety. Through the above maintenance methods, the normal operation of the walking electric transporter can be ensured, its service life can be extended, and the possibility of failure can be reduced. Thank you for the support of new and old customers. If you have any technical questions, please feel free to consult.
