Precautions for using lithium batteries for electric forklifts!

First of all, be sure to prepare fire extinguishers and other equipment at the charging site! In order to ensure the long-term safe and effective operation of your battery system, please be sure to understand the following regulations: the normal working environment temperature of lithium batteries is -20℃-50℃; the storage environment temperature is 0℃-35℃; the optimal charging and discharging temperature is 25℃-50℃. In cold storage or cold areas, be sure to choose lithium batteries with heating systems!

For vehicles in normal operation: be sure to charge after discharging to 10%; fully charge at least once every half a month; perform battery maintenance once every two months to prevent damage to the battery system.

For lithium batteries that are not used in vehicles or stored for a long time: the optimal storage capacity SOC range of the battery: 50%-80%; the optimal storage environment requirements for the battery: ventilation, dryness, no direct sunlight, no rain, away from heat sources, etc.; regular charging and discharging, charging and discharging once every six months, discharge to 15%, charge to 100%, and then discharge to the optimal storage SOC range of 50%-80%.

Lithium battery charging, charging preparation: 1. Park the forklift in the charging area in a standardized manner and turn off the vehicle key switch; 2. Confirm that the battery button is in the on state; 3. Check whether there are any foreign objects in the battery charging interface; 4. Confirm the status of the charger and check whether there are any foreign objects in the charger charging interface;

Charging: 1. Connect the charging interface correctly; if there is a start button, press it; 2. Observe the charging connection and display status on the charger display; 3. Wait for charging confirmation for about 15 seconds, the charging current is normal, and charging begins;

Charging ends 1. Press the charger stop button; 2. Confirm that the charging current in the charger is 0A, and unplug the charging plug correctly; 3. Close the forklift battery compartment cover and place the charger charging plug in a standardized manner.